Itemized Billing CodeAn Itemized Billing Code can be assigned for each extension and for each verification code.If a call is not made from an extension, such as via Direct Inward System Access (DISA) or TIE line, andno verification code is used, the Itemized Billing Code assigned to location 1 in the Verification Code Tablewill be used.® 6.1 [4-1-1] Wired Extension—Extension Settings—Option 1— ARS Itemized Code® 6.10 [4-2-1] Portable Station—Extension Settings—Option 1— ARS Itemized Code® 8.3 [6-3] Verification Code— Itemized Billing Code for ARSConditionsCAUTIONThe software contained in the ARS feature to allow user access to the network must be upgraded torecognize newly established network area codes and exchange codes as they are placed into service.Failure to upgrade the premises PBXs or peripheral equipment to recognize the new codes as they areestablished will restrict the customer and the customer’s employees from gaining access to the networkand to these codes.KEEP THE SOFTWARE UP-TO-DATE WITH THE LATEST DATA.• Logging Outgoing Calls by SMDRWhether SMDR logs the user-dialed number or the ARS-modified number is determined through systemprogramming. (® 16.1.3 SMDR (Station Message Detail Recording))® 13.1 [11-1] Main—SMDR Options— Option—ARS Dial• ARS Data Import/ExportARS tables and data can be copied to and from the PBX and a PC using the Maintenance Console software.Files are saved in CSV (Comma Separated Value) format. Because of the large amounts of programmingthat may be necessary to use ARS effectively, you may choose to export ARS tables and data to a PC,edit them using the software of your choosing, then import the new data to the PBX. This is particularlyconvenient if you need to update your ARS tables for new area codes or telephone rates, or when you’dlike to copy ARS tables from one PBX to another.® 2.5.8 Tool—Import® 2.5.9 Tool—Export• TRSToll Restriction (TRS) checks are performed before ARS number modification, so program TRS DeniedCode Tables and Exception Code Tables accordingly. (® 17.1.6 TRS (Toll Restriction))• When ARS Routing Takes PlaceARS routing takes place after the preprogrammed number of digits (leading number + additional numberof digits) have been dialed.PC Programming Manual References2.5.8 Tool—Import→ARS - Leading Digit→ARS - Except Code→ARS - Routing Plan2.5.9 Tool—Export4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone— Dial—Extension Inter-digit4.18 [2-9] System Options—Option 3— Dial Tone—Dial Tone for ARS6.1 [4-1-1] Wired Extension—Extension Settings—Option 1— ARS Itemized Code6.10 [4-2-1] Portable Station—Extension Settings—Option 1— ARS Itemized Code8.3 [6-3] Verification Code— Itemized Billing Code for ARSSection 10 [8] ARS13.1 [11-1] Main—SMDR Options— Option—ARS DialDocument Version 2009-12 Feature Manual 211.1.3 ARS (Automatic Route Selection)
