Panasonic KX-NCP1000 Programming Manual

Also see for KX-NCP1000: Brochure & specs Specifications Installation manual Guide Networking guide

Panasonic KX-NCP1000 Programming Manual Manual pdf 53 page image

4.1.2 V-SIPGW16 Protocol TraceThe trace data of protocol activity can be collected from the V-SIPGW16 card and saved to the PC, using theutility, V-SIPGW16 Protocol Trace.This option requires that the target V-SIPGW16 card be set to INS status.Follow the steps below to trace and file V-SIPGW16 card protocol activity:NoteTo access the following menu options, you must be logged in to the Maintenance Console in Batch orInteractive mode at Installer level. For details about the software mode and access level, referto "2.1.1 Starting Maintenance Console and Software Modes" and "2.1.2 Access Levels" in the PCProgramming Manual.To save trace data to the SD Memory Card1. From the Utility menu, select V-SIPGW16 Protocol Trace.When the progress bar disappears, the protocol trace is complete. The trace data has been saved to theSD Memory Card (file name: "PRTSIPC").To transfer trace data to the PC1. From the Utility menu, select File Transfer PBX (SD Card) to PC.The list of trace data files will be displayed.2. Select the desired trace data file.3. Click Transfer.4. Navigate to the folder in which you want to save the file.5. Enter a file name.6. Click Save.7. Click OK.Document Version 2009-12 Programming Manual for Virtual SIP CO Line Card 534.1.2 V-SIPGW16 Protocol Trace