OutgoingMessage(OGM) No.FloatingExtn. No.*1Automated Attendant No.*2 Busy/DNDMessageNo.*30 1 2 3 4 5 6 7 8 901 501 100301200103202101102400104205 0402 502 05: : : : : : : : : : : : :*1 ® 7.4 [5-3-2] Voice Message—DISA Message— Floating Extension Number® [730] Outgoing Message (OGM) Floating Extension Number*2 ® 7.4 [5-3-2] Voice Message—DISA Message— 1 Digit AA Destination (Extension Number)—Dial 0–9*3 ® 7.4 [5-3-2] Voice Message—DISA Message— Busy / DND Message No.DISA Security Mode and Available FeaturesIf the DISA AA service is not employed, the caller may access the PBX features by entering the featurenumbers. To prevent others from accessing the PBX features, it is possible to assign DISA security.® 7.3 [5-3-1] Voice Message—DISA System— DISA Security—DISA Security Mode® [732] DISA Security ModeThe features available depend on the preprogrammed DISA security mode as follows:Security Mode IntercomCallTIE Line CallCO Line CallWithout PBX Code With PBX CodeAll SecurityCO Line Security ü üNo Security ü ü ü ü*1ü: Available*1 If CO line call is available, Account Code Entry (® 1.1.2 Account Code Entry) is also available.NoteDISA AA service and Operator Call (® 12.1.5 Operator Features) are available for any security mode.Security Mode Override by Verification Code EntryIf the caller performs Verification Code Entry (® 19.1.1 Verification Code Entry) while hearing a DISAmessage, the security mode can be temporarily changed to No Security mode.Entry method:Verification Code Entry feature number + + verification code + verification code PINAfter changing mode, the new mode remains in force for the duration of the call.DISA Intercept Routing—BusyIf the first destination called by the outside party is busy, the call is redirected as follows:a. The call is redirected to the Intercept Routing—Busy destination assigned to the first destination.b. If an Intercept Routing—Busy destination is not assigned to the first destination and a prerecorded DISABusy Message is assigned, the caller will hear the DISA Busy Message.c. If neither an intercept destination nor a DISA Busy Message is assigned, the caller will hear a busy tone.6.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination— Intercept Destination—WhenCalled Party is Busy78 Feature Manual Document Version 2009-124.1.8 DISA (Direct Inward System Access)
