For an extension joining the conversationTo join a conversation with an entry codeOff-hook.Talk.PT/SLT/PS/SIP Extn.Dial conferencegroup number (1 digit).Enter 32.conferencegroup no.3 2C.ToneEnter entry code(max. 8 digits).Enter #.Enter #.entry code *• * If you do not enter an entry code when making the conference group call, extensions/outsidetelephones can join the conversation without needing to enter an entry code.• Entry codes can consist of the digits "0" through "9". When " " is used for an entry code, noone can join a conversation that is already in progress.• When you are using an outside telephone (through DISA or TIE Line), it is possible to jointhe conversation after accessing your extension using Walking COS.• Extensions/outside telephones can join the conversation using this feature only when theconference group call has already been established between the extension originating aconversation and at least one member.• To join a conversation that is already in progress, extensions/outside telephones must beusing an idle extension with no held calls.• If a conversation has reached the maximum number of participants, this feature cannot beused to join the conversation.• Starting a Conference Group Call using Hands-free AnswerbackIf the Hands-free Answerback feature is enabled with at least one conference group member,the call can be automatically answered and the conversation begins with only one participant(the caller). Then, up to 6 participants can use the Join After Time Out feature to join theconversation.1.3.18 Data Line SecurityYou can protect the line against audible notification tones, such as a call waiting tone during a conversation.Set this feature if your extension has a data communication device, such as a PC or fax machine connectedto ensure secure data transmission.Document Version 2013-05 Operating Manual 671.3.18 Data Line Security
