1.3.58 Redial, Last NumberThis is convenient when calling the same outside party again.Off-hook. Press REDIAL or enter #.REDIALORPT/SLT/PS/SIP Extn.• Up to 32 digits can be stored and redialed.• After pressing REDIAL, if you hear a busy tone again, press REDIAL to retry.1.3.59 Room Status ControlIn a hotel-type environment, an extension assigned as a hotel operator can check guests intoor out of rooms and confirm that the room is clean and ready for the next guest by changingthe room status of the corresponding extension. The hotel operator’s extension must haveflexible buttons assigned as Check-in, Check-out, and Cleaned-up buttons, and a DSS buttonfor each extension that will be used in a guest room.• The hotel operator must be using a 6-line display PT to use the Room Status Control features.• While in Room Status Control mode:a. The hotel operator’s extension can only check extensions in/out and ready/not ready. Allother operations will be ignored.b. The light of each DSS button shows the room status of the corresponding extension asfollows:Off: Checked-out and ReadyFlashing Red: Checked-out and Not ReadyRed on: Checked-in[Light Pattern Example: Checked-in Mode]Room1230DSS buttonRoom1231Room1232Room1233Room1234Rooms 1230 and 1234are currently inchecked-in status.Check-in buttonCheck-out buttonCleaned-up buttonc. The lights of other buttons may not show their normal display.d. The hotel operator’s extension is considered to be busy. Callers to that extension willhear a busy tone.Document Version 2009-11 Operating Manual 1131.3.59 Room Status Control
