11.4 [9-4] NDSS Key TableExtensions at up to 7 other PBXs that will be monitored using Network Direct Station Selection (NDSS) canbe registered. A maximum of 250 extensions can be registered. To create an NDSS button to monitor anextension, the extension must be registered here first.To clear NDSS link data, click the NDSS Clear button.Note that the parameters on this screen can only be set when the Network Data Transmission for CentralizedOperator Feature—Network PBX ID is set to 1 in the 11.2 [9-2] Network Data Transmission screen.Network Extension No.Specifies the number of the remote extension (attached to another PBX) that will be monitored. The numberinput here can use either Extension Number Method or PBX Code Method.DefaultNot stored.Value RangeMax. 16 digits (consisting of 0–9, *, and #)Maintenance Console Location11.4 [9-4] NDSS Key TableProgramming Manual ReferencesNoneFeature Manual References13.1.17 Private Network Features—NDSS (Network Direct Station Selection)13.1.15 PRIVATE NETWORK FEATURESNetwork Extension Name for Programming ReferenceSpecifies the name of the network extension. This name is only shown here, not on the displays of extensions.DefaultNot stored.Value RangeMax. 20 charactersMaintenance Console Location11.4 [9-4] NDSS Key TableProgramming Manual ReferencesNone778 PC Programming Manual Document Version 2009-1211.4 [9-4] NDSS Key Table
