Panasonic NCP500 Operating Manual

Also see for KX-NCP1000: Brochure & specs Specifications Installation manual Guide Networking guide

Contents

Panasonic NCP500 Operating Manual Manual pdf 185 page image

3.2 Manager Programming3.2.1 Programming InformationThe manager can program the following item.• Other Extensions ControlAvailable ExtensionThe extension assigned as a managerRequired TelephoneA Panasonic Proprietary Telephone with display (over 2 lines)(e.g., KX-NT343, KX-DT346, KX-T7636)Manager PasswordTo enter programming mode, the manager password (max. 10 digits) is required. (Default: 1234)CAUTION• The PBX has a default password preset. For security, change the password the first time that youprogram the PBX.• It is strongly recommended that a password of 10 numbers or characters be used for maximumprotection against unauthorized access. For a list of numbers and characters that can be used in thepassword, refer to "1.3.14 Character Entry".• To avoid unauthorized access to the PBX, keep the password secret. If it becomes known to others,the PBX may be misused.• Change the password periodically.ConditionsThe programming extension must be idle, on-hook and holding no calls.3.2.2 Manager ProgrammingChanging the Settings and Extension ControlFollowprogramminginput.To exitTo programTo enter the program modemanagerpasswordPressHOLD.Press PROGRAMor PAUSE.1Enter 1. Press PROGRAMor PAUSE.ORPROGRAMPAUSEORPROGRAMPAUSETo continueprogramminginputHOLDEnter managerpassword.Item Programming InputChanging the manager password.00 + + Password (max. 10 digits) +Document Version 2009-11 Operating Manual 1853.2.2 Manager Programming