Panasonic KX-NCP500 Installation Manual

Also see for KX-NCP1000: Brochure & specs Specifications Installation manual Guide Networking guide

Contents

Panasonic KX-NCP500 Installation Manual Manual pdf 143 page image

5.1.4 Using the Reset ButtonIf the PBX does not operate properly, use the Reset Button. Before using the Reset Button, try the systemfeature again to confirm whether there definitely is a problem or not.CAUTIONIn order to avoid possible corruption of data on the SD Memory Card, please ensure that the "SDACCESS" LED is off before pressing the Reset Button.Note• When the System Initialise Switch is set to "NORMAL", pressing the Reset Button causes the following:– Camp-on is cleared.– Calls on hold are terminated.– Calls on exclusive hold are terminated.– Calls in progress are terminated.– Call park is cleared.Other data stored in memory, except the above, are not cleared.• Be aware that pressing the Reset Button with the System Initialise Switch in the "SYSTEMINITIALIZE" position clears all data stored in the PBX. Do not perform this operation unless you intendto delete all data from the PBX.OperationIf the PBX does not operate properly:1. Slide the System Initialise Switch to the "NORMAL" position.2. Press the Reset Button for about 1 second.Reset ButtonRUN IndicatorSystem Initialise SwitchLEDInstallation Manual 1435.1.4 Using the Reset Button