PT Programming Manual References[205] Automatic Redial Repeat TimesFeature Manual References21.1 Capacity of System ResourcesOperating Manual References1.3.58 Redial, Last Number1.4.1 Call Log, Incoming15.1.2 Ring Tone Pattern SelectionDescriptionIt is possible to select the type of ring tone pattern that arrives at an extension for each type of incoming call,etc.[Ring Tone Patterns]1 280 msSingleDoubleTripleS-Double* The duration of a ring tone may vary by country/area.[Ring Tone Pattern Table]The ring tone pattern table is categorized into three parts, each containing a specified number of pattern plans.The ring tone pattern table is categorized as follows:• Incoming CO Line Calls: each pattern plan can assign a ring tone pattern for each trunk group.4.15 [2-8-1] Ring Tone Patterns—Call from CO• Incoming Doorphone Calls: each pattern plan can assign a ring tone pattern for each doorphone.4.16 [2-8-2] Ring Tone Patterns—Call from Doorphone• Others: each pattern plan can assign a ring tone pattern for incoming intercom calls as well as ring tonesassigned to certain features (e.g., timed reminder).4.17 [2-8-3] Ring Tone Patterns—Call from OthersThe ring tone patterns that arrive at an extension are determined by the pattern plan that is assigned to thatextension through system programming.Document Version 2009-12 Feature Manual 27515.1.2 Ring Tone Pattern Selection
