To set forwarding status and outside destinations to ring in parallel for outside calls to anICD groupPTEnter CO line access numberand then outside phone number.FWD/DND AUTO DIALSTOREEnter 4 to 7.Press the fixedFWD/DND button.Press STORE.0 FWD off(max. 32 digits)outsidephone no.CO lineaccess no.While on-hook (when in FWD/DND Setting Mode)AUTO DIALSTOREPress STOREto set.OREnter 1.A confirmation tone willbe heard.FWD–All Calls1To cancel ringingTo set ringing7465Virtual PS 1Virtual PS 2Virtual PS 3Virtual PS 4Enter 0.• Only one extension assigned as member 1 in each ICD group can perform the settings forvirtual PSs.• It is possible to switch the forwarding status (on/off) of a virtual PS by entering the number(4–7) of that extension, then pressing the fixed FWD/DND button, instead of pressing theAUTO DIAL/STORE button.1.3.31 Hands-free AnswerbackYou can answer an incoming call without going off-hook as soon as the line is connected.When an intercom call arrives, you will hear the caller talking without the phone ringing. Whenan outside call arrives, you will hear the caller talking after a preprogrammed number of rings.Hands-free Answerback for outside calls requires System Programming.Document Version 2010-08 Operating Manual 891.3.31 Hands-free Answerback
