1.8.2 Refusing Incoming Calls (Do Not Disturb [DND])– Do Not Disturb (DND)– Switching FWD/DND Status Using Fixed FWD/DND ButtonDo Not Disturb (DND)You can set this feature to prevent incoming calls from ringing at your extension. This can be useful, forexample, when you are in a meeting or busy.To set/cancelOn-hook.Enter 1 to setor 0 to cancel.PT/SLT/PS/SIP Extn.SetCancel10OROff-hook. Enter 71.120 Both CallsIntercom CallsOutside CallsOROR17Enter 0 to 2 as you desire.C.Tone• When using a proprietary telephone, you can set or cancel Do Not Disturb by pressing theFWD/DND button (fixed button) instead of " 710".• The FWD/DND button light shows the current status as follows:Off: Both features are not set.Red on: FWD modeFlashing red slowly: DND mode• The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND SettingMode. Ask your manager what mode your system is in if you are not sure.(1) When in FWD/DND Cycle Switch Mode:Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting as shownbelow:FWD DND Off(2) When in FWD/DND Setting Mode:Pressing the FWD/DND button (fixed button) while in idle status allows you to switch theFWD/DND status and set the FWD destination (refer to " Switching FWD/DND StatusUsing Fixed FWD/DND Button").NoteA FWD/DND button (customised button) is always in FWD/DND Cycle Switch Mode: themode cannot be changed.132 User Manual1.8.2 Refusing Incoming Calls (Do Not Disturb [DND])
