Feature Manual References6.1.4 Flexible Numbering/Fixed Numbering13.1.28 PS—CO Status Display (KX-WT125/KX-WT126 only)DescriptionThe status of CO lines selected through system programming can be displayed on the KX-WT125/KX-WT126, even when the PS is idle. For information about PS settings and conditions, refer to thedocumentation for the KX-WT125/KX-WT126.Conditions• To use the CO Status Display feature of the KX-WT125 and KX-WT126, the following versions are required:DHLC/DLC card: LPR software version 7.003 or laterCSIF card: LPR software version 4.006 or laterBUS-S card (KX-TDE600 only): LPR software version 3.012 or laterDECT 6.0 CSs: software version 7.000 or later• A maximum of 12 CO lines can be selected for this feature using system programming.• This feature can be disabled using system programming. However, disabling this feature will also disablethe display of single CO line numbers on the PS.• If a CO line other than those specified in system programming or a feature is assigned to a flexible buttonof the PS, the CO line status will not be displayed for that button while the PS is idle or when receiving acall as a member of a PS ring group.PC Programming Manual References3.48 [1-3] Option— System Wireless—CO Status Display in Standby (KX-WT125/126 only) (Need SystemRestart)6.17 [4-2-6] Portable Station—Single CO Appearance13.1.29 PS—DirectoryDescriptionA portable station (PS) user can make a call or access PBX features using information stored in the PS andPBX.Refer to the Operating Instructions supplied with your PS for available directories and usage.Directory Type Description ProgrammingPS Dialing Directory A list of names and telephone numbers. Used tomake a call to one of the stored parties.Stored in the PS by thePS user.Quick Dialing A list of frequently dialed feature numbers as well asnames and telephone numbers. Used to quicklyaccess one of the stored features, or quickly make acall to one of the stored parties.Stored in the PS by thePS user.System SpeedDialing DirectoryA system-wide list of names and telephone numbers.Used to make a call to one of the stored parties.Stored in the PBX.Document Version 2013-05 Feature Manual 28913.1.29 PS—Directory
