1.15 Using a KX-HGT100 SIP Extension1.15.1 Operation ListTo access PBX features, the access numbers (extension numbers or feature numbers) are required.KX-HGT100 (firmware version 2.00 or later) users can use the following features:Note• To execute an operation, you must press the OK button after pressing all the buttons of the operation.• If these feature numbers do not work properly with the KX-HGT100, ensure that the firmware of theKX-HGT100 and the MPR software file version of the PBX are upgraded to their latest versions. Fordetails, consult your dealer.Features Refer toIntercom Call 1.2.1 Basic CallingCalling Another ExtensionOperator Call 1.2.1 Basic CallingTo call an operator (Operator Call)Automatic Line Access 1.2.1 Basic CallingTo select an idle outside line automatically (Automatic LineAccess)Outside Line Group Access 1.2.1 Basic CallingTo select an idle outside line in the specified outside line groupautomatically (Outside Line Group Access)TIE Line Access 1.2.1 Basic CallingMaking a Call to a Private Network (TIE Line Access)Redial 1.2.3 RedialRedialling the Last Number You Dialled (Last NumberRedial)Speed Dialling—System/Personal 1.2.2 Easy Dialling– Using Numbers Stored in the PBX (System SpeedDialling)– Using Numbers Stored at Your Extension (PersonalSpeed Dialling)Personal Speed Dialling—Programming1.2.2 Easy DiallingUsing Numbers Stored at Your Extension (Personal SpeedDialling)Doorphone Call 1.10.1 If a Doorphone/Door Opener is ConnectedExternal BGM On/Off 2.1.4 Turning on the External Background Music (BGM)S-CO Line Access 1.2.1 Basic CallingTo select the specified outside lineAccount Code Entry 1.2.1 Basic CallingUsing an Account Code (Account Code Entry)190 User Manual1.15.1 Operation List
