Installation Manual ReferencesKX-NCP500/KX-NCP10003.12 Power Failure ConnectionsKX-TDE100/KX-TDE2003.6.7 SLC16 Card (KX-TDA0174), MSLC16 Card (KX-TDA0175), and CSLC16 Card (KX-TDA0177)3.6.8 MCSLC16 Card (KX-TDA1176) and MCSLC24 Card (KX-TDA1178)3.12.1 Power Failure ConnectionsKX-TDE6003.8.7 CSLC16 Card (KX-TDA0177), ESLC16 Card (KX-TDA6174), EMSLC16 Card (KX-TDA6175), ECSLC24Card (KX-TDA6178), and EMSLC24 Card (KX-TDA6179)3.14.1 Power Failure ConnectionsPC Programming Manual References13.3 [11-3] Power Failure Transfer13.1.12 PredialingDescriptionA display proprietary telephone (PT) user can check and correct the number to be dialed on-hook. The call willbe initiated after going off-hook.Conditions• Storing the Predialed Number in Personal Speed DialingThe predialed number can be stored in Personal Speed Dialing by pressing the AUTO DIAL/STORE button(® 16.1.7 Speed Dialing, Personal). In this case, the extension will enter personal programming modeautomatically so that a name can be assigned to the stored number.Operating Manual References3.1.2 Personal Programming13.1.13 Printing MessageDescriptionAn extension user can select a message to be output on SMDR. Up to eight messages can be preprogrammedin the Printing Message table, and are available to all extensions connected to the PBX. A message can containthe "%" symbol, which requires a number to be entered in its place when the message is selected at anextension.Depending on the content of the preprogrammed messages, this feature can be used to record a variety ofinformation, which can be output on SMDR to, for example, a connected PC.[Example]If message 1 is preprogrammed as "Started work", and message 2 as "Finished work", employees can sign inby selecting message 1 when starting work, and sign out by selecting message 2 when finishing. A connectedPC can then be used to generate employee work records.Document Version 2013-05 Feature Manual 23313.1.13 Printing Message
