To clear the log informationPress TRANSFER.Display PTWhile viewing the log informationTRANSFERPress Call Log, or Up or Downuntil desired party appears.(Call Log)ORTo callOff-hook.While viewing the log informationDisplay PTPress Call Log, or Up or Downuntil desired party appears.(Call Log)OR• The Call Log button light shows the current status as follows:Off: No incoming call, or you have already viewed the call log.Red on: You have missed calls to view.• If your call is answered by another extension, the caller’s information is recorded in the logsof both your extension and the answering extension.• You can lock your call log display by using an extension PIN (Personal Identification Number),so that you can prohibit access to your logged information. Refer to "3.1.2 PersonalProgramming".• You can also have a Call Log button for an ICD Group (Incoming Call Distribution Group).• If a call arrives while you are using the call log, the call log display will be replaced with thecaller’s information.• PS user: Refer to "Operating Instructions" for the PS.• KX-NT400 user: Refer to "Operating Instructions" for the KX-NT400.• Caller information received with a call waiting tone from the telephone company will not belogged in the call log.Customizing Your Phone• 3.1.4 Customizing the ButtonsCreate or edit a Call Log button or Call Log for ICD Group button.1.4.2 Call Log, OutgoingYou can redial using the outgoing call log.146 Operating Manual Document Version 2009-111.4.2 Call Log, Outgoing
