3.47 [1-2] Portable StationVarious portable station (PS) settings can be programmed. A maximum of 64 (with the KX-NCP500/KX-NCP1000), 128 (with the KX-TDE100/KX-TDE200), or 512 (with the KX-TDE600) PSs can be registered.Information on 32 PSs is displayed at a time. To display other PSs, click the applicable tab.PS Registration and De-registrationA PS must be registered to the PBX by programming both the PBX and PS before it can be used. Programminginstructions of the PBX are given below; programming instructions of the PS are found in the InstallationManual.It is possible to de-register the PS later.RegistrationFollow the steps below to register the PS.1. Click Registration.A dialog box will appear. Non-registered (available) extension numbers and names are displayed on theleft.2. Highlight numbers and names and click the right arrow to select them for registration. Click Next.3. If the registration is still in progress, the dialog box will show "Registration Executing".If the registration is successful, the dialog box will show "Registration Completed". Click Close.Once a PS is successfully registered, the status of the PS will update to show "Registered".De-registrationFollow the steps below to de-register the PS.1. Click De-registration.A dialog box will appear. Registered extension numbers and names are displayed on the left.2. Highlight numbers names and click the right arrow to select them for de-registration. Click Next.A dialog box will appear.3. Click Confirm.If the de-registration is successful, the dialog box will show "De-registration succeed!".4. Click Close.Once the PS is successfully de-registered, the status of the PS will update to show "None".Forced De-registrationFollow the steps below to forcibly de-register the PS when normal de-registration has been unsuccessful orde-registration has been performed only on the PS.1. Click Forced De-registration. A dialog box will appear. Registered extension numbers and names aredisplayed on the left.2. Highlight numbers and names and click the right arrow to select them for forced de-registration. ClickNext.A dialog box will appear.3. Click OK.A dialog box will appear.4. Click Confirm.If the de-registration is successful, the dialog box will show "Forced de-registration succeed!".5. Click Close.Once the PS is successfully de-registered, the status of the PS will update to show "None".Document Version 2011-10 PC Programming Manual 3493.47 [1-2] Portable Station
