2.2.7 Programme launcher—Connect—ISDN RemoteConnects to the PBX in Interactive mode using the ISDN TA interface of the PBX.This method is only available when a user-supplied ISDN TA that supports CAPI 2.0 is used, and Remote—ISDN Remote Floating Extension Number of the 13.1 [11-1] Main screen is set.This option allows direct entry of connection parameters, for cases where the PC is used to connect to one orjust a few PBXs, and an individual profile for each PBX is not necessary. If you connect to multiple PBXs andwould prefer to choose from among pre-saved profiles instead, see 2.2.8 Programme launcher—Connect—Profile Setup for more details about creating profiles.To connect to the PBX by ISDN Remote1. From the programme launcher, select Connect.The Login window will be displayed.2. Select a connection option.• Select a Profile Name if you want to use a pre-saved profile.a. Select the profile to use from the drop-down list.b. If the system password for the PBX has not been stored with the profile, enter it.If the system password has been stored with the selected profile, it does not need to be entered.• To enter the parameters manually, select the PBX Model and confirm that the ISDN Remote radiobutton is selected.a. Specify the settings as required. For more details, see the table below.b. Enter the system password for the PBX.3. Click Connect.Connection Setting for ISDN RemoteSetting Values ExplanationDial Number 30 digits (consisting of 1-9,0, *, #, -, and "," [comma])Enter the telephone number to be dialled to access thePBX.PC Programming Manual 432.2.7 Programme launcher—Connect—ISDN Remote
