• If Automatic Call Hold has been preprogrammed, you can put the current call on holdautomatically by pressing another PDN button to make or answer another call.Call Transfer Using SDN ButtonYou can transfer a call to a PDN extension with a simple operation using a corresponding SDN button.To transfer a call to a PDN extensionOn-hook.Talk.During a conversationThis step can be omitted.(SDN)Press SDN.PT/PS*• System programming is required to use this feature during a conversation with an extension.• * When an SDN button is in Standard SDN Key Mode, you have to press the SDN buttontwice to transfer the call, unless you used that SDN button to answer an incoming call.Customizing Your Phone• 3.1.2 Personal Programming—Preferred Line Assignment—IncomingSelect the seized line when going off hook.• 3.1.2 Personal Programming—Preferred Line Assignment—OutgoingSelect the seized line when going off-hook.• 3.1.4 Customizing the ButtonsCreate or edit a Primary Directory Number (PDN) or Secondary Directory Number (SDN)button.1.3.50 Printing MessageYou can record a variety of information from your extension using up to 8 preprogrammed messages. Messageinformation from all extensions is recorded with the PBX. For example, it is possible to use this feature as atime card by selecting preprogrammed "sign in" and "sign out" messages.In a hotel-type environment, this feature can be used to record room information from a room extension.For a list of preprogrammed messages, consult your dealer.Document Version 2009-11 Operating Manual 1071.3.50 Printing Message
