[For PC Console Only]• Incoming Group Screen:Names, extension numbers, and the status (e.g., busy) of each extension can be monitored on a singlescreen. Calls can also be made and received on this screen.Conditions• Hardware Requirements: KX-DT343/KX-DT346 or KX-T7633/KX-T7636 DPT and USB ModuleInstallation Manual ReferencesKX-NCP500/KX-NCP10003.8.4 First Party Call Control CTI ConnectionKX-TDE100/KX-TDE2003.8.4 First Party Call Control CTI ConnectionKX-TDE6003.10.4 First Party Call Control CTI ConnectionPC Programming Manual References3.24 [1-1] Slot—Port Property - Extension Port→ DPT Type—Type→ DPT Type—Location No.PT Programming Manual References[601] Terminal Device AssignmentFeature Manual References21.1 Capacity of System Resources13.1.6 PC ProgrammingDescriptionAlthough many PBX features can be programmed using a proprietary telephone (PT) (® 13.1.32 PTProgramming), a PC connected to the PBX can use the Maintenance Console software to program in furtherdetail. System programming, diagnosis, and data upload/download can be performed either through on-siteprogramming or remote programming.1. On-site Programming: Programming that is performed using an on-site PC connected directly to the PBX.2. Remote Programming: Programming that is performed using an off-site PC that connects to the PBX viaa CO line.222 Feature Manual Document Version 2013-0513.1.6 PC Programming
