Type DescriptionTone 3-2 Sent before a conversation is established when accessing the followingfeatures by the feature numbers:• Call Park Retrieve• Call Pickup• Hold Retrieve• Paging Answer• Trunk Answer From Any Station (TAFAS)Tone 4-1 Sent when a call changes from a two-party call to a three-party call (e.g.,Executive Busy Override, Conference, Privacy Release, Two-way Record).Tone 4-2 Sent when a call changes from a three-party call to a two-party call (e.g.,Executive Busy Override, Conference, Privacy Release, Two-way Record).Tone 5 Sent when a call is placed on hold (including a consultation hold).Conditions• Confirmation Tone PatternsAll confirmation tone patterns have a default (® 21.2 Tones/Ring Tones).• It is possible to eliminate each tone.PC Programming Manual References4.18 [2-9] System Options—Option 3→ Confirmation Tone—Tone 1 : Called by Voice→ Confirmation Tone—Tone 2 : Paged / Automatic Answer→ Confirmation Tone—Tone 3-1 : Start Talking after Making Call / Call from Doorphone→ Confirmation Tone—Tone 3-2 : Start Talking after Answering Call→ Confirmation Tone—Tone 4-1 : Start Conference→ Confirmation Tone—Tone 4-2 : Finish Conference→ Confirmation Tone—Tone 5 : Hold3.1.20 Consultation HoldDescriptionConsultation Hold is a condition that a party is in, when an extension is calling other parties in order to performCall Transfer, Conference, or Call Splitting. When the operation is completed or canceled, the consultationhold is released.In Consultation Hold, the original call is treated as if it is on hold, allowing the extension to call a third party allon one line. In Call Hold, the party on hold and the third party are connected to the extension using separatelines.Feature Manual References3.1.9 Call Splitting3.1.10 Call Transfer3.1.18 Conference60 Feature Manual Document Version 2009-123.1.20 Consultation Hold
