Features After SettingParalleled Telephone Paired SLT will ring.Hot Line*1 OffTimed Reminder Cleared*1 These features can be programmed to not be canceled by Extension Feature Clear.This feature is also known as Station Program Clear.Conditions• Extension Dial Lock (® 5.1.4 Extension Dial Lock) and the extension personal identification number (PIN)(® 5.1.6 Extension PIN (Personal Identification Number)) will not be cleared by this feature.• If dial tone 2 is heard after Extension Feature Clear:After performing Extension Feature Clear, Call Waiting will be enabled if "Extension Clear: CallWaiting" is set to "Clear" through system programming. In this case, dial tone 2 will be heard whengoing off-hook. (® 4.1.4 Dial Tone)PC Programming Manual References4.9 [2-6-1] Numbering Plan—Main—Features— Extension Feature Clear4.18 [2-9] System Options—Option 2→ Extension Clear—Call Waiting→ Extension Clear—Fwd/DND→ Extension Clear—Hot Line (Pickup Dial)Operating Manual References1.3.25 Extension Feature Clears5.1.6 Extension PIN (Personal Identification Number)DescriptionEach extension user can be assigned a personal identification number (PIN) through system programming orpersonal programming (Extension PIN [Personal Identification Number]). This PIN is used to set features oraccess the extension remotely.The following features require a valid PIN:a. Live Call Screening (LCS)*1 (® 19.1.4 Voice Mail DPT (Digital) Integration)b. Incoming and Outgoing Call Log Display Lock (® 16.1.6 Speed Dialing, Personal), Personal Speed DialingDisplay Lock (® 3.1.5 Call Log, Incoming)c. Walking Extension (® 20.1.2 Walking Extension)d. Extension Dial Lock (® 5.1.4 Extension Dial Lock)e. Walking COS (® 20.1.1 Walking COS)f. Walking COS through DISA (® 4.1.8 DISA (Direct Inward System Access))*1 If an extension user has assigned an extension PIN, the PIN is required when activating this feature.94 Feature Manual Document Version 2009-125.1.6 Extension PIN (Personal Identification Number)
