Phaser 6180MFP Multifunction Printer Service Manual 9-3Parts ListUsing the Parts List■ ID No.: The callout number from the exploded part diagram.■ Name/Description: The name of the part to be ordered and the numberof parts supplied per order.■ Part Number: The material part number used to order that specific part.■ Parts identified throughout this manual are referenced PL#.#.#; Forexample, PL3.1.10 means the part is item 10 of Parts List 3.1.■ A black triangle preceding a number followed by a parenthetical statementin an illustrated parts list means the item is a parent assembly, made up ofthe individual parts called out in parentheses.■ The notation “with X~Y” following a part name indicates an assembly thatis made up of components X through Y. For example, “1 (with 2~4)”means part 1 consists of part 2, part 3, and part 4.■ An asterisk (*) following a part name indicates the page contains a noteabout this part.■ The notation (NS) next to a part indicates that particular part is notspared, but contained in a kit or major assembly.■ The notation “J1<>J2 and P2” is attached to a wire harness. It indicatesthat connector Jack 1 is attached to one end of the wire harness andconnector J2 is attached to the other end that is plugged into P2.NoteOnly parts showing part numbers are available for ordering by support.Parts not showing part numbers are available on the parent assembly.AbbreviationsAbbreviation MeaningC C-ringE E-ringKL K-clipS Screw
