1-2 Phaser 6180MFP Multifunction Printer Service ManualGeneral InformationPrinter Introduction and OverviewThe Xerox Phaser 6180MFP Multifunction Printer combines a color laser printengine, a Scanner, Copier, and Fax. The Phaser 6180MFP has a single-passcolor laser-design architecture, which offers color and mono print speed at 20/31-ppm, and resolutions up to 600 x 600 dots-per-inch (dpi). The printersupports Adobe PostScript 3 and PCL6, USB 2.0, Parallel port, and 10/100Base-TX Ethernet. The Scanner supports USB Scan to Desktop, NetworkScan to FTP, Network Scan to Server Message Block (SMB), and NetworkScan to E-Mail with resolution up to 600 dpi and interpolated up to 9600 dpi.The Phaser 6180MFP provides a standard 150-Sheet Tray 1 (MPT) and astandard 250-Sheet Tray 2. Tray 1 (MPT) supports specialty media, cardstock, and envelopes. The standard media input is 400 sheets and themaximum input with an optional Tray 3 is 950 sheets. The Output Tray holds300 sheets facedown.The printer options add memory, media capacity, and functionality.■ Memory upgrades are available to increase the standard RAM from 384MB up to 1.4 GB maximum.■ A 550-Sheet Feeder is available as an option.■ Automatic 2-sided printing is available and no tools are required to installthe Duplex Unit.■ The Multi-Protocol Network Card expands the supported networkprotocols.Technical Support InformationThe Xerox Phaser 6180MFP Multifunction Printer Service Manual is theprimary document used for repairing, maintaining, and troubleshooting theprinter.To ensure complete understanding of this product, participation in XeroxPhaser 6180MFP Service Training is strongly recommended. To service thisproduct, Xerox certification for this product is required.For updates to the Service Manual, Service Bulletins, knowledge base, etc.,go to:■ Xerox Global Service Net - https://www.xrxgsn.com/secure/main.pl■ Service Partners: http://www.office.xerox.com/partnersFor further technical support, contact your assigned Xerox Technical Supportfor this product.
