Phaser 6180MFP Multifunction Printer Service Manual 5-57Print-Quality TroubleshootingDamaged PaperPaper comes out from the printer wrinkled, folded, or worn-out.Initial Actions■ Check the paper transfer path.■ Ensure there are no debris on the transfer path.NoteSteps 2-5 should only be considered if the original document is damaged.WarningEnsure to wait for the Fuser to cool down before starting the procedure.Troubleshooting Reference TableApplicable Parts Example Print■ MPT Retard Holder Assembly,PL2.1.3■ Tray 2 Retard Roll, PL2.2.17■ Tray 1 (MPT) Feed Roll, PL3.1.10■ Feed Roll, PL3.2.53■ Transfer Unit, PL4.1.1■ Fuser, PL6.1.10■ ADF Scanner Assembly, PL11.1.1■ ADF Roller & Pad, PL11.1.16■ Duplex Unit, PL12.1.1■ Tray 3 Feed Roll, PL13.2.10■ Tray 3 Retard Roll, PL13.4.10Troubleshooting Procedure TableStep Actions and Questions Yes No1 Does the error occur when printing? Go to step 6. Go to step 2.2 1. Check the error.2. Does the document meet the ADFspecifications?Go to step 3. Change thepaper type oruse the platenmode.3 1. Check the side guide setting. Resetthe side guide setting.2. Does the document feed correctly?Complete. Go to step 4.4 1. Replace the ADF Feed Roller andSeparator Pad (page 8-110).2. Does the document feed correctly?Complete. Go to step 5.Damaged Print Media
