Phaser 6180MFP Multifunction Printer Service Manual 4-99General TroubleshootingFax Configuration SettingsThe following information provides the minimum Fax configuration settings forthe Phaser 6180MFP.NoteBe sure to record the correct settings before initializing the password,since Initialization will reset all other settings.If you forgot the Admin password, you can initialize the password byturning On the printer while pressing the System button.Required SettingsPrinter Menu Menu ContentNote: Default item is in Bold.Line Type Line Type Setting■ PSTN: Public Switched Telephone Network■ PBX: Private Branch ExchangeDialing Type Dialing Type Setting■ PB: Push button (touch tone) dialing■ DP (10PPS): Pulse dialing at 10PPS■ DP (20PPS): Pulse dialing at 20PPSAns Select Answering Mode Selection■ TEL Mode: You must receive a fax manually.■ FAX Mode: The multifunction printer receives a faxautomatically.■ TEL/FAX Mode: The multifunction printer automaticallyswitches between an external telephone and the faxreception mode.■ Ans/FAX Mode: The multifunction printer automaticallyswitches between an external answering machine and thefax reception mode.■ DRPD Mode: Available when DRPD service is providedwith your telephone line.Country Selection of the country where the multifunction printer isused (selectable from 30 countries including the UnitedStates).United States, Unknown, Argentina, Bahrain, Belgium,Brazil, Canada, Chile, Denmark, France, Germany, India,Ireland, Israel, Italy, Jordan, Luxembourg, Mexico,Morocco, Netherlands EU, Norway, Poland, Russia, SouthAfrica, Spain, Sweden, Switzerland, Turkey, UAE, Ukraine,United KingdomYour Fax Number Contains your telephone number, which is printed at the topof each page sent from the multifunction printer. Thisfeature is available when you set Send Header to On, andmust be set to On when you set Junk Fax Filter to On.
