Phaser 6180MFP Multifunction Printer Service Manual 1-39General InformationToner Remaining AmountThe CentreWare Internet Services (IS) and PrintingScout (SimpleMonitor)allow the printer to display toner remaining amount.Maintenance FunctionFirmware UpdateThe Image Processor Board and Multi-Protocol Network Card firmware canbe updated by customers and service technicians using Windows PC orMacintosh with dedicated utilities. Firmware updates are available atwww.xerox.com/office/6180MFPsupport.Detailed procedures are available in the “Firmware Update” on page A-3.NoteBoot Code can be updated via USB or Parallel port only.Print Cartridge Control Panel DisplayPrint Cartridge Control Panel Display FunctionalityNormal Status Life WarningErrorEnd ofLife ErrorXerox Xerox (TM)Print CartridgeReplaceSoonReplacePrintCartridgePrints with fullfunctionality.Xerox (refillPrintCartridge)Xerox (TM)Print CartridgeReplaceSoonEmpty Prints with fullfunctionality up to40% of the PrintCartridge life.Other OEM(non-Xeroxprintermanufacturer)Non-Xerox PrintCartridgePrinter displays errorand will not print.Non-XeroxPrint CartridgeManufacturerNon-Xerox PrintCartridgeNo LifeTrackingReplacePrintCartridgePrints with fullfunctionality.Updated Firmware WindowsVia USB/IEEE1284 Via Network (port 9100)Image Processor Board Available AvailableMulti-Protocol Network Card Available AvailableMCU Board* Available Available* MCU Board cannot be updated when ROM starts to be used for MCU Board.
