6-6 Phaser 6180MFP Multifunction Printer Service ManualAdjustments and CalibrationsCalibrationsInitializing Print MeterThis process initializes the Print Meter.1. From the Control Panel, press the System button.2. Press the Up Arrow or Down Arrow button to find Admin Menu. Pressthe OK button.3. Press the Up Arrow or Down Arrow button to find Maintenance. Pressthe OK button.4. Press the Up Arrow or Down Arrow button to find Init Print Meter. Pressthe OK button.5. Are You Sure? message is displayed. Select Yes and press the OKbutton to start the process.6. Initializing message is displayed. The Maintenance - Init Print Metermenu is displayed when the process is completed.Initializing NVM (NVRAM)This process initializes the settings stored in the NVRAM except for thenetwork settings. The NVRAM is a non-volatile memory that stores the printersettings even after the power is turned Off. After executing this function andrestarting the printer, all the menu parameters are reset to their default values.There are two options available: User Section and System Section.■ User Section (User NVM) – Unique user information stored in NVMwhich includes Address Book (e-mails, computer, FTP, and Fax).■ System Section (System NVM) – System information stored in NVMwhich includes default settings and some passwords for print, copy, scan,and fax. Any information stored in the User NVM will not be cleared whenSystem NVM is reset.1. Press the System button to access the printer Control Panel menu.2. Press the Up Arrow or Down Arrow button to find Admin Menu. Pressthe OK button.3. Press the Up Arrow or Down Arrow button to find Maintenance. Pressthe OK button.4. Press the Up Arrow or Down Arrow button to find Initialize NVM. Pressthe OK button.5. Select User Section or System Section. Press the OK button.6. Are You Sure? message is displayed. Select Yes and press the OKbutton to start the process.7. Please wait message is displayed.8. The Ready menu is displayed when the process is completed.
