Xerox Phaser 6180MFP Service Manual

Also see for Phaser 6180MFP: Brochure & specs User guide Features setup guide Supplementary guide Supplementary guide

Contents

Xerox Phaser 6180MFP Service Manual Manual pdf 745 page image

Phaser 6180MFP Multifunction Printer Service Manual 8-127Service Parts DisassemblyTray 3 Feeder Unit (PL13.2.9)1. Remove the Optional 550-Sheet Feeder (page 8-116).2. Remove the Tray 3 Rear Cover (page 8-118).3. Remove the Optional Feeder Assembly (page 8-117).4. Remove the Tray 3 Front Left Cover (page 8-119).5. Remove the Tray 3 OPF Left Cover (page 8-120).6. Remove the Tray 3 Front Right Cover (page 8-121).7. Remove the Tray 3 OPF Right Cover (page 8-122).8. Remove the Tray 3 Turn Clutch (page 8-123).9. Remove the Tray 3 Feed Clutch (page 8-124).10. Remove the Tray 3 Size Switch (page 8-129).11. Remove the Tray 3 Right Tray Guide (page 8-125).12. Remove the Tray 3 Left Tray Guide (page 8-126).NoteWhen performing the following step, leave the junction connector on theOptional Frame Assembly side cable.13. Disconnect the Tray 3 Feeder connector P/J4212 and slide the connectorout of the hole of the Optional Frame Assembly (PL13.3.1).14. Remove 4 screws (8 mm) securing the Tray 3 Feeder to the OptionalFrame Assembly.15. Release the 2 hooks securing the Tray 3 Feeder to the Optional FrameAssembly and release the 2 notches from the hole of the Frame.s6180mfp-338P/J4212