Phaser 6180MFP Multifunction Printer Service Manual 3-53Error Messages and CodesRemove Print Cartridge Tape (Yellow/Magenta/Cyan/Black)The Print Cartridge (Yellow/Magenta/Cyan/Black) tape was not removedwhen a new Print Cartridge is installed. The following troubleshootingprocedure applies to these errors.Applicable Chain Links■ Chain Link 093-919: Check Yellow Cartridge■ Chain Link 093-920: Check Magenta Cartridge■ Chain Link 093-921: Check Cyan Cartridge■ Chain Link 093-922: Check Black CartridgeInitial Actions■ Check the Print Cartridge life using CentreWare IS.■ Cycle printer power.■ If problem persists, follow the procedure below.Troubleshooting Reference TableApplicable Parts Wiring and Plug/Jack Map References■ Print Cartridge (Y/M/C/K),PL5.1.17-20■ Dispenser, PL5.2.10■ MCU Board, PL9.2.13■ Top LV Harness, PL10.1.3■ “Map 3 - Image Processor Board andDispenser Motors” on page 10-12■ “Map 4 - LVPS and MCU Board” onpage 10-13■ “Developer” on page 10-38Troubleshooting Procedure TableStep Actions and Questions Yes No1 Check the Print Cartridge tape. Has thetape been removed?Go to step 2. Remove thetape on thePrint Cartridge.Go to step 2.2 Does the error still occur? Go to step 3. Complete.3 1. Replace the Print Cartridge(page 8-11).2. Does the error still occur?Go to step 4. Complete.
