Phaser 6180MFP Multifunction Printer Service Manual 1-29General InformationImage SpecificationsNoteThe printer has 4 mm margins on all sides.■ Refer to “Print-Quality Troubleshooting” on page 5-1 for detailedspecifications.Color (Simplex and Duplex)Characteristic SpecificationsColor Registration Worst target of 3.< 170 μmBlack/White (Simplex and Duplex)Characteristic SpecificationsScanning AreaMaximum Scanning Area ■ Document Glass: 215.9 mm (8.5 in.) x 297.0 mm(11.7 in.)■ ADF: 215 mm (8.5 in.) x 355.6 mm (14.0 in.)Print AreaMaximum Print Area 210.9 mm (8.2 in.) x 351.6 mm (13.8 in.)Guaranteed Print Area 207.9 mm (8.2 in.) x 347.6 mm (13.7 in.)Skew 190 mm (7.5 in.) ± 1.2 mm (.05 in.)Perpendicularity 114.5 mm (4.5 in.) ± 0.8 mm (.03 in.)ParallelismHorizontal 180 mm (7.1 in.) ± 1.2 mm (.05 in.)Vertical 234 mm (9.2 in.) ± 1.2 mm (.05 in.)LinearityHorizontal 190 mm (7.5 in.) ± 0.5 mm (.02 in.)Vertical 234 mm (9.2 in.) ± 0.5 mm (.02 in.)Slant 269 mm (10.6 in.) ± 1.2 mm (.05 in.)Magnification ErrorHorizontal Simplex 190 mm (7.5 in.)± 0.5 mm (.02 in.)Horizontal Duplex 190 mm (7.5 in.) ± 0.8 mm (.03 in.)Vertical Simplex 234 mm (9.2 in.) ± 0.5 mm (.02 in.)Vertical Duplex 234 mm (9.2 in.) ± 0.8 mm (.03 in.)RegistrationLeading Edge 10.0 mm (.40 in.) ± 2.0 mm (.08 in.)Side Edge 8.5 mm (.33 in.) ± 2.5 mm (.09 in.)
