Chapter 44-84.4 Shut-Down Sequence4.4.1 Flow of Operation 0010-7871iR7105 / iR7095 / iR7086If the main power is turned off while the HDD is being accessed, the HDD can suffer damage. It is, therefore, important to perform the shut-down sequence (HDDprotection mode), which will stop the ongoing access to the HDD and enable the machine to be turned off safely.F-4-84.5 Image Processing4.5.1 Overview of the Image Flow 0010-7872iR7105 / iR7095 / iR7086F-4-9*12101214222324A system error or a packet errorhas been detected.- Start up in safe mode, and perform full formatting using the SST and reinstall the system software; then,turn off and back on the power.- Replace the HDD, and reinstall the system software.YY Description ActionEnd screenThe shutdown sequence starts.Jobs that are in operation/waiting for execution aredisplayed.The screen enables you to confirm what job is goingto be canceled.It becomes enabled to turn OFF the main power switch.The shutdown processing is executed after job cancellation.Job check screenPress on the control panelpower switch (3 sec or more)HDD protectionexecution modeSENDPullScanE-MailPDL PrintBOXPCOriginalCopyAAAPrint outputScanImage dataOther iR machine
