Canon iR7086 Series Service Manual

Contents

Canon iR7086 Series Service Manual Manual pdf 525 page image

Chapter 1414-25F-14-6914.8.18 Fitting the Side Guide Timing Belt of the ManualFeed Tray Assembly 0010-9358iR7105 / iR7095 / iR7086Butt the rack plate [1] of the manual feed tray against section A (open state).Move the slide volume [2] in the direction of B, and fit the timing belt [3] tothe pulley [4].F-14-7014.8.19 Fitting the Drive Belt 0010-9363iR7105 / iR7095 / iR7086Fit the drive belt to the pulleys and rollers as follows:F-14-7114.8.20 Cleaning the Double-Feed Sensor (transmission)0012-2953iR7105 / iR7095 / iR7086If the surface of the double-feed sensor (transmission) [1] is soiled or showsa build-up of paper lint, clean it to avoid incorrect operation of the double-feed detection mechanism.Keep in mind, however, that the fine print [2] on the sensor surface is a no-tation used for production control, and is not the result of soiling.F-14-72[2] [1][4][3] [1] [4] AB[2]Pickup motorPickup drive beltMain drive beltMain motorDeveloping/waste toner drive beltF:[1][2]