Chapter 44-7XX= "01" to "FF"T-4-2XX YYXX CHK-TYPE Partition DescriptionOccurrence at time ofstart-upOccurrence duringnormal execution03 05 00,01,02,04 11,21 13,25 10,12,14,22,23,24Action Action011FSTDEV compressed image data (e.g., Box)*1 *5*9 *10 *11 *1202 IMG_MNG file management table, profile03 FSTCDEV job archiving (changing)042APL_GEN general-purpose data05 TMP_GEN general-purpose data (temporary file)06 TMP_FAX not used07 TMP_PSS for PDL spool (temporary file)08 3 PDLDEV PDL-related file09 4 BOOTDEV firmware (system, MEAP, key, certificate, PDF dictionary, RUI,content, voice dictionary) *3 *810 5 APL_MEAP MEAP application *1 *511 6 APL_SEND address book, filter *2 *612 7 APL_KEEP for non-initialization data storage *3 *813 8 APL_LOG system log *1 *5FF 0 not specified check for and recovery of HDD full-fault sectors *4 *7YY Description Action*103 The ongoing write operation isinterrupted (at start-up).- Set the partition number in question for CHK-TYPE, and execute HD-CLEAR; then, turn off and then backon the power.- Enter CHK-TYPE in question (for the partition), and execute HD-CLEAR; then, turn off and then back onthe power.*2- Ask the user to download the address book data using a remote UI.- Set the partition number in question for CHK-TYPE, and execute HD-CLEAR; then, turn off and then backon the power.- Start download mode, and perform full formatting using the SST and reinstall the system software; then turnoff and then back on the power.*3The recovery operation for the boot partition is not possible without the use of the SST in save mode.- Set CHK-TYPE=0, and execute HD-CHECK; then, turn off and then back on the power.- Start download mode, and perform full formatting using the SST and reinstall the system software; then,turn off and then back on the power.*4 - Set CHK-TYPE=0, and execute HD-CHECK; then, turn off and then back on the power.- Set CHK-TYPE=1, 2, 3, 5, and execute HD-CLEAR; then, turn off and then back on the power.*505 A file system error has occurred.- Enter CHK-TYPE in question (for the partition), and execute HD-CLEAR; then, turn off and then back onthe power.- Replace the HDD, and reinstall the system software.*6The machine is designed so that execution of HD-CLEAR is not possible in service mode (so as to preventloss of information, e.g., address book, filter information).- Ask the user to download the address book data using a remote UI.- In service mode, start download mode, and execute full formatting using the SST and reinstall the systemsoftware; then, turn off and then back on the power.*7- Set CHK-TYPE=1, 2, 3, 5, and execute HD-CLEAR; then, turn off and then back on the power.- Replace the HDD, and reinstall the system software.*8The recovery operation for the boot partition is not possible without the use of the SST in save mode.- Start up in safe mode, and execute full formatting using the SST and reinstall the system software; then, turnoff and back on the power.- Replace the HDD, and reinstall the system software.*900010204The HDD has poor contact, or asystem error has occurred.- Check the cable and the power cord.- Start up in safe mode, and execute full formatting using the SST and reinstall the system software; then, turnoff and back on the power.- Replace the HDD, and reinstall the system software.*10 1121 The HDD has poor contact.- Check the cable and the power cord.- Replace the HDD, and reinstall the system software.*11 1325The ongoing write operation hasbeen interrupted.There is a strong possibility of damage in the file data (e.g., Box) stored on the HDD.- Set the partition number in question for CHK-TYPE, and execute HD-CHECK; then, turn off and back onthe power.- Set the partition number in question for CHK-TYPE, and execute HD-CLEAR; then, turn off and back onthe power.(In the case of BOOTDEV, BOOTDEV2 or APL_SEND, execute reformatting using the SST, and reinstallthe system software.)- Replace the HDD, and reinstall the system software.
