Chapter 88-44F-8-107When mounting the registration clutch, be sure to hook the clutch stop [A]on the protrusion [B] of the clutch cover.8.11.16 Registration Brake Clutch8.11.16.1 Removing the Registration Brake Clutch 0010-9183iR7105 / iR7095 / iR70861) Remove the transfer separation charging assembly front cover. (1 screw)2) Disconnect the connector [1], and loosen the 2 screws [2] (w/ hexhole); then, detach the registration brake clutch [3].F-8-1088.11.17 Fixing/Feed Unit8.11.17.1 Removing the Fixing/Feed Unit 0010-9186iR7105 / iR7095 / iR70861) Slide out the fixing/feed unit.2) Remove the 2 stepped screws [1].F-8-1093) Remove the fixing/feed unit [1] from the slide rail [2].F-8-110Be sure to work as a group of two.8.11.18 Feeding Roller8.11.18.1 Removing the Feeding Roller 0010-9187iR7105 / iR7095 / iR70861) Remove the pickup assembly from the main body.2) Remove the screw [2], and detach the feeding roller cover [1].3) Remove the stop ring [3] form the front of the fixing roller.4) Remove the stop ring [4] and the pickup roller [5] at the font; then, de-tach the feeding roller [7] together with the timing belt [6].F-8-1118.11.18.2 Orientation of the Feeding Roller of the Deck/Cassette Pickup Assembly 0010-9188iR7105 / iR7095 / iR7086When mounting the feeding roller assembly to the deck/cassette pickup as-sembly, be sure that the belt pulley [2] is to the front of the machine. Whenmounting the feeding roller [3] to the feeding roller shaft [4], be sure that theround marking [5] is toward the front of the machine.F-8-1128.11.19 Vertical Path Roller8.11.19.1 Removing the Vertical Path Roller 1/3/4 0010-9189iR7105 / iR7095 / iR70861) Remove the deck right/cassette pickup assembly.2) Remove the E-ring [1] and the bearing [2] from the front, and removethe grip ring [3], clutch [4], and bearing [5] from the rear.[A] [B][1][2][2][3][1][1][2][1][1] [2] [4] [5] [3] [7] [6][2] [1][4][3][5](front)
