Chapter 1010-24- 1 screw [3] (w/ washer)F-10-8910.5.24 All Night Power Supply PCB10.5.24.1 Before Starting the Work 0011-7620iR7105 / iR7095 / iR70861) Remove the lower left cover.2) Remove the upper left cover.3) Remove the cover plate.4) Remove the delivery anti-adhesion fan mounting plate [1].- 1 connector [2]- 6 screws [3]F-10-9010.5.24.2 Removing the All Night Power Supply PCB 0010-9605iR7105 / iR7095 / iR70861) Remove the all night power supply PCB [1].- all connectors of PCB- 4 screws [2]F-10-9110.5.25 Relay PCB10.5.25.1 Removing the Relay PCB 0010-9604iR7105 / iR7095 / iR70861) Remove the left lower cover. (4 screws)2) Disconnect the connector from the PCB; then, remove the screw [1],and detach the relay PCB [1] from the four PCB holders [2].F-10-9210.5.26 High-Voltage Transformer (AC)10.5.26.1 Removing the High-Voltage TransformerAssembly (AC) 0010-9603iR7105 / iR7095 / iR70861) Remove the rear cover.2) Remove the HV-AC PCB together with its mounting base.- 2 connectors [2]- 2 screws [3]F-10-933) Disconnect the 3 connectors [1], and remove the screw [2]; then, detachthe high-voltage transformer assembly (AC) [3].F-10-9410.5.27 HV-AC PCB10.5.27.1 Removing the HV-AC PCB 0010-9602iR7105 / iR7095 / iR70861) Remove the rear cover.2) Remove the HV-AC PCB [1].- 2 connectors [2]- 4 screws [3][1][2][3][2][2][3] [3][1][1][2][2][1][2][2][2] [2][1][2][3] [3][1][1] [2][3]
