Chapter 1010-1110.5 Parts Replacement Procedure10.5.1 External Covers10.5.1.1 Front Cover10.5.1.1.1 Removing the Front Cover0017-9835iR7105 / iR7095 / iR7086 / iR7095P1) Open the toner cartridge cover [1].2) Open the front cover, and remove the mounting screw [3] for the covertype [2].3) Push up the hinge pin [4] found on the front cover, an turn it to the front90 deg C to pull it off downward.4) Pull off the front cover at an angle.F-10-810.5.1.2 Rear Cover10.5.1.2.1 Removing the Rear Cover0017-9836iR7105 / iR7095 / iR7086 / iR7095P1) Remove the 11 mounting screws [1], and detach the rear cover [2].F-10-910.5.1.3 Inside Upper Cover10.5.1.3.1 Removing the Inside Upper Cover0017-9837iR7105 / iR7095 / iR7086 / iR7095P1) The toner cartridge cover.2) Open the front cover.3) Remove the mounting screw [1], and detach the primary charging as-sembly cover [2].4) Shift down the fixing/feeding lever [3], and slide out the fixing/feederunit [4].F-10-105) Disconnect the 2 connectors [1].6) Remove the 5 mounting screws [2], and detach the inside upper cover[3].F-10-1110.5.1.4 Fixing/Feeding Unit Cover10.5.1.4.1 Removing the Fixing/Feeder Unit Cover0017-9839iR7105 / iR7095 / iR7086 / iR7095P1) Open the front cover, and shift down the fixing/feeding lever to slide outthe fixing/feeding unit.2) Remove the mounting screw [2] of the releasing lever [1]; then, push-ing the releasing lever link [3] found at the rear of the fixing/feeder unit,remove the releasing lever while keeping it shifted up.F-10-123) Remove the mounting screw [1], and detach the fixing knob [2].4) Remove the mounting screw [3], and detach the transfer separationcharging assembly cover [4].5) Remove the 2 mounting screws [5], and detach the fixing/feeder unitcover [6].[1][2][3][4][4][1][1][2][1][2][3] [4][1] [1] [2][2][2][2][3][3][1] [2]
