Chapter 99-8F-9-11SERVICE MODE:COPIER > OPTION > BODY > OHP-TEMP (transparency mode temperature setting switchover)0: 198 dg C (default)1: 193 dg C2: 188 dg C3: 183 dg C9.3.1.3 Heavy Paper Mode 0010-8236iR7105 / iR7095 / iR7086To prevent a drop in the surface temperature of the fixing roller in heavy paper mode, the machine uses a higher down sequence shift temperature.The machine uses heavy paper down sequence mode when 'heavy paper' is selected for the following in user mode: common settings>paper type.SERVICE MODE:COPIER > OPTION > BODY > FIX-TEMP (heavy paper down sequence start temperature setting)COPIER > OPTION > BODY > TEMP-TBL (heavy paper mode copy temperature setting; Jpn model only)To prevent down sequence from starting with the 1st sheet in heavy paper mode, the machine uses heavy paper temperature control (in view of the fact that theJapanese model uses a control temperature of 188 deg C for printing).9.3.1.4 Power Save Mode 0010-8237iR7105 / iR7095 / iR7086A press on the Power Save key of the control panel causes the machine to decrease the STBY control temperature to reduce power consumption.Setting iR7105 86 cpm 74 cpm Suspend ResumeiR7095 77.8 cpm 67 cpm Suspend ResumeiR7086 70 cpm 60 cpm Suspend Resume0 (default) 194 deg C 193 deg C 183 deg C 198 deg C1 189 deg C 188 deg C 178 deg C 193 deg C2 184 deg C 183 deg C 173 deg C 188 deg CSetting Heavy paper copy temperature0 +10 deg C1 to 4 +0 deg CWait indication Green GreenRedFixing motor (M3)Main heater (H1)Sub heater (H2)STBY INTR PRINT LSTR STBYTransparencymode selectedStart key ON205200198193Transparency control temperatureControlled to198 deg CControlled to198 deg CContinues idle rotation untilthe surface temperature ofthe fixing roller drops to thetransparency control temperature.195Controlled to195 deg C*If the reading of the thermistor is lower thatthe transparency control temperature, printing is started as is.for Jpn model, -10 deg C for all.
