Chapter 99-119.5 Parts Replacement Procedure9.5.1 Fixing Unit9.5.1.1 Removing the Fixing Assembly 0010-9381iR7105 / iR7095 / iR70861) Slide the fixing/feeding unit halfway out the main body.2) While pushing on the stopper [2] on both ends of the fixing/feedingunit rail [1], slide the fixing/feeding unit farther out.F-9-143) While pushing the releasing lever link [1] found at the rear of the fixing/feeding unit, shift up the fixing/feeding unit releasing lever [2], and re-move the screw [3] to detach.F-9-15When setting the fixing/feeding unit in the main body, be sure to mount thereleasing lever, and shift the lever while pressing the releasing lever link.4) Remove the two screws [1], pre-transfer charging assembly cover [2], andfixing roller knob [3]; then, remove the two screws [4], and detach the fix-ing/feeding unit cover [5].F-9-165) Remove the fixing motor [1].- 2 connectors [2]- Free the cable from the edge saddle [3]- 3 screws [4]- 5 connectors [5]F-9-176) Open the fixing/delivery assembly, and remove the screw [1]; then, hold-ing the front [3] and the rear [4] of the fixing assembly [2], detach the fix-ing assembly from the main body.[1][2][1] [2][1][2] [3][1][1][2][3][4] [4][5][1][2][4][3][5][5]
