Chapter 1111-19Application NameIt is the name (bundle-name) declared in a statement within the application program. It may not necessarily be identical to the name of the program.Application ID/System Application NameIn the case of a system application, it will be the file name. If a general application, it is the application ID (application-ID) declared in a statement within the ap-plication program. Within the device, the applications are set apart by means of their application IDs.Application VersionIt is the version of the application (bundle-version) declared in a statement within the application program.StatusIt indicates the status of the application in question; specifically,Installed: the application has been installed.Active: the application is being in use.Resolved: the application is at rest.Installed OnIt indicates the date on which the application was installed.VendorIt is the name of the vendor that developed the application, and is the name (bundle-vendor) declared in a statement within the application program.License StatusIt indicates the status of the license; specifically,None: no license is needed.Not Installed: no license has been installed.Installed: the appropriate license has been installed.Invalid: the license has been invalidated.Overlimt: the license has been used beyond its permitted limit.License Expires AfterIt indicates the date after which the license expires. If the status of the license is 'none', this item will not be printed.License Upper LimitIt indicates the limit imposed on individual counter readings. If the status of the license is 'none', this item will not be printed.Counter ValueIt is the current counter reading of a specific counter. If the status of the license is 'none', this item will not be printed.Maximum Memory UsageIt indicates the maximum amount of memory that the application uses. It is the amount (maximum memory usage) declared in a statement within the applicationprogram, and is expressed in kilobytes.Registered ServiceIt is a list of services that have been registered by the application with the MEAP framework. Some services may not have printable data.11.1.15 Installing an Application 0017-9701iR7105 / iR7095 / iR7086 / iR7095PImportant:- To install an application, the user needs to use the following URL when accessing the license control system to obtain a license file. In doing so, he/she needsto register the license access number of the application and the serial number of the device.http://www.canon.com/meap/-Maximum 20 applications can be installed (In iR5160/iR6060/iR2250/iR2850/iR3350, one is the portal service already installed at the time of shipment fromthe factory)-The following are the resource amounts assured for each device in the operation of one MEAP application. These values are for reference purpose only, thereforethe unused resource of SMS needs to be checked at the time of installation of MEAP application.The displayed values of SMS resource may be larger than the followings since the actual values vary according to the log-in service (authentication function)selected by users and the configuration (future models).T-11-14Product Name HDD Memory Thread Socket FileDescriptioniR5020/iR6020/iR2220/iR3320 300MB 20MB 128 48 42iRC2620/iRC3220 400MB 20MB 128 48 42iR2270/iR2870/iR3570/iR4570/iR85/iR8070/iR6570/iR5570 400MB 20MB 128 48 42iRC3170/iRC2570 400MB 20MB 128 48 42iRC3180/iRC2580 1024MB 30MB 128 128 128iR7086/iR7095/iR7095P/iR7095Printer/iR7105 Initial MEAP Spec Ver 400MB 20MB 128 48 42Change Information 1024MB 30MB 128 128 128iRC4080/iRC4580/iRC5180 Initial MEAP Spec Ver 1024MB 20MB 128 48 42Change Information 1024MB 30MB 128 128 128imagePRESS C1 1024MB 20MB 128 48 42iRC2880/iRC3380 1024MB 20MB 128 48 42iR3025/iR3030/iR3035/iR3045 400MB 20/30MB* 128 48 42iR5050 1024MB 30MB 128 128 128iR5055/iR5065/iR5075 1024MB 20MB 128 48 42
