Canon iR7086 Series Service Manual

Contents

Canon iR7086 Series Service Manual Manual pdf 217 page image

Chapter 55-31F-5-99F-5-1005.4.8.3 Removing the Scanner Motor 0011-8657iR7105 / iR7095 / iR70861) Slide out the reader power supply cover [1].- 4 screws [2]- Free the cable from the wire saddle found behind the cover.F-5-1012) Disconnect the connector [1] of the interface PCB.F-5-1023) Shift the scanner motor [1] in the direction of the arrow to detach.- 2 springs [2]- 3 screws [3]F-5-1035.4.8.4 Mounting the Scanner Motor 0011-7978iR7105 / iR7095 / iR7086When mounting the scanner motor, check to be sure that the timing belt [3]is properly fitted to the scanner pulley [1] and the motor shaft [2].F-5-104F-5-1055.4.9 ADF Open/Close Sensor5.4.9.1 Before Starting the Work 0011-8671iR7105 / iR70951) Remove the reader rear cover.2) Remove the reader upper rear cover.3) Remove the interface PCB cover.5.4.9.2 Removing the ADF Open/Closed Sensor 0011-8672iR7105 / iR70951) Remove the sensor mounting plate [1].- 1 connector [2]- 1 screw [3][2][1][2][1][2][2][1][1][2][2][3][1][3][3][2]