Chapter 99-7F-9-10SERVICE MODE:COPIER > OPTION > BODY > FIX-TMP (down sequence setting)Set it to '0' to place priority on image quality; or, set it to '2' to place priority on speed.9.3.1.2 Transparency Mode 0010-8235iR7105 / iR7095 / iR7086In transparency mode, the machine decreases the fixing roller surface temperature to prevent wrapping of a transparency around the fixing roller (otherwise the heatof the roller could melt the film surface).Setting iR7105 86cpm 74cpm Suspend ResumeiR7095 77.8cpm 67cpm Suspend ResumeiR7086 70cpm 60cpm Suspend ResumeSetting 0 183 deg C 178 deg C 173 deg C 188 deg CSetting 1 (default) 178 deg C 173 deg C 168 deg C 183 deg CSetting 2 173 deg C 168 deg C 163 deg C 178 deg CMain heater (H1)Sub heater (H2)Copying speed200195190185180175170165160105cpm 105cpm86cpm 74cpm SuspendSTBY PRINT PRINTSTOPStart key ONWhen 178 deg C,dropped to 86 cpm(77.8 cpm), <70 cpm>.When 173 deg C,dropped to 74 cpm(67 cpm), <60 cpm>.When 168 deg C, stops printing.When 183 deg C, resumesprinting automatically.Also causes the sub heaterto go on to recover lost temperature.200V model: controlled to 188 deg C100V/208V/230V model:controlled to 198 deg C(95cpm) (77.8cpm) (67cpm) (95cpm)<86cpm> <70cpm> <60cpm> <86cpm>() represents iR7095; <> represents iR7086.