Chapter 88-37F-8-608.11.4 Left Deck Pickup Assembly8.11.4.1 Removing the Left Deck Pickup Assembly 0011-8491iR7105 / iR7095 / iR70861) Slide out the left deck.2) Remove the two screws [1] found on the left and right sides of the leftdeck[2]; then, detach the left deck[2].F-8-613) Open the front cover.4) Disconnect the connector [1] from inside the machine, and remove thelocking support [2].F-8-625) Remove the two screws [1], and detach the two pickup fixing plates [2];then, detach the left deck pickup assembly [3].Keep supporting the pickup assembly; otherwise, the pickup assembly coulddrop when the fixing plate is removed.F-8-638.11.5 Left Deck Pickup Sensor8.11.5.1 Removing the Left Deck Pickup Sensor 0010-8963iR7105 / iR7095 / iR70861) Remove the front deck (left) pickup assembly.2) Remove the screw [1], and detach the pickup sensor unit [2].F-8-643) Disconnect the connector [1], and detach the left deck pickup sensor [2].F-8-65When removing the scanner sensor, be sure to remove the paint used to lockthe claw in place in advance to prevent breaking the claw. When mountingit, be sure the claw is not displaced or the sensor is not disoriented.8.11.6 Right Deck Pickup Sensor8.11.6.1 Removing the Right Deck Feed Sensor/RightDeck Pickup Sensor 0010-8987iR7105 / iR7095 / iR70861) Remove the front deck (right) pickup assembly.2) Remove the guide plate [1].[3][4][4][5][1][2][1][1][2][2][1][3][1][1][2] [1][2][1][1][2]
