Chapter 22-31F-2-123iR7105/7095 Only1) Fit the cleaning instructions label [1] of the appropriate language on theupper rear cover as indicated, and attach it over the existing label. (TheEnglish label is attached at time of shipment.)F-2-1241) Fit the Lamp Warning Label [1] of the appropriate language on the upperrear cover as indicated, and attach it over the existing label. (The Englishlabel is attached at time of shipment.)F-2-1251) Open the manual feeder assembly [1] of the ADF; then, fit the ManualFeeder Set Label [2] as indicated, and attach it in place.F-2-1262.2.18 Others 0012-2444iR7095P1) Affix the shut down instruction label [1] in the appropriate language onthe indicated position.F-2-1272.2.19 Attaching the Labels, Placing Paper, and CheckingImages and Operation 0010-8971iR7105 / iR7095 / iR70861) Check with the user to find out the size of paper that will be used.2) Press the release button of the front deck (right, left), and slide out thedeck.3) Attach the 3-hole paper placement label [1].F-2-1284) Put paper in the front deck (right/left).5) Close the front deck (right/left). Affix the corresponding cassette size la-bel [1] onto the paper size plate of the each deck.A4A3 B5B4 A5A4R B5R A5R[1][1][1]If you are changing the size of the front deck (right, left), refer to theinstructions under "Switching Over the Front Deck (right/left) Paper Size."[2][1]ON[1][1]
