Chapter 1010-15F-10-3110.5.6 Waste Toner Drive Assembly10.5.6.1 Removing the Waste Toner Drive Assembly 0010-9591iR7105 / iR7095 / iR7086ConstructionF-10-321) Remove the rear cover.2) Remove the high-voltage PCB unit.3) Remove the flywheel.4) Remove the drum gear.5) Remove the waste toner pipe.6) Remove the drum drive assembly.7) Remove the six screws [1], and detach the waste toner drive assembly[2].F-10-3310.5.7 Multifeeder Pickup Drive Assembly10.5.7.1 Removing the Multifeeder Pickup DriveAssembly 0010-9593iR7105 / iR7095 / iR7086ConstructionF-10-341) Remove the rear cover.2) Remove the high-voltage PCB unit.3) Loosen the mounting screw on the rear fixing plate of the registrationroller assembly.4) Remove the four screws [1], and disconnect the four connectors [2];then, detach the multifeeder pickup drive assembly [3].F-10-3510.5.8 Lifter Drive Assembly10.5.8.1 Removing the Lifter Drive Assembly (right deck)0010-9594iR7105 / iR7095 / iR7086ConstructionF-10-361) Remove the rear cover.2) Remove the high-voltage PCB unit.3) Remove the flywheel.4) Remove the drum gear.5) Remove the waste toner pipe.6) Remove the screw, and loosen the harness guide [1]; disconnect thetwo connectors [2], and remove the four screws [3]; then, detach the lifterdrive assembly (for the right deck) [4].[5] [4][4] [3][2][1][1] [1][2] [2][2] [2][1][1][1] [1][3]
