Chapter 1111-44Detail of License FileF-11-6911.1.30 Option for exclusive individual measure 0017-9716iR7105 / iR7095 / iR7086 / iR7095P-Display Setting of Copy TabMake a setting as to whether to display/hide the copy screen (copy tab) on the control panel. This is the specification for users who want to customize hiding it oncontrol panel.Default value1: displaySetting range, item0: hide 1: displaySetting Procedure1) Startup [SERVICE MODE] (After pressing [USER MODE] button of MEAP device, press [2] button and [8] button at the same time on control panel. Thenby pressing [USER MODE] button again, [SERVICE MODE] screen is displayed).2) Press [COPIER] button.3) Press [Option] button.4) Press [BODY] button.5) Press [<-]or[->] (arrow) button.6) Press [UI-COPY] button.7) Press either 0 (hide) or 1 (display) on control panel (the numerical value input in the field is displayed), and press [OK] button.8) Check to see that it is reflected in setting field, and turn off the main power, and then, turn on the main power.-Error at starting up the MEAP application/Setting to hide JAM screen (level 2)In the case that operation is restricted by MEAP application, hide the warning screen of error/JAM (such as JAM screen, door opening, no-toner). In the case thatthese errors occur, there will be a display indicating 'call the service personnel' etc.Memo:Part of the warning screens is displayed if shifting to the device screen.- As for the screens for jam and no-toner, the warning screen (animation) can be displayed by pressing the followings: [Device Screen] > [Recovery Procedure]- As for the screen for door opening, the warning screen cannot be displayed because there is no display for [[Device Screen] > [Recovery Procedure]Default value1: No activation of warning display ! "#$ % &'()(*+ , &'()(*+ , &'()(*+ , &'()(*+ , &'()(% ( , &'()(% ( *+ , &'()(% ( *+ - , &'()(% ( *+ ( , &'()( ( , &'()( ( *+ , './$0 123*&) " '44546 78 20$&!' &99:)993(+; 8<'/$#(=.$ *;)>? 6-8 +&4"+ $ .2@$ "#: ! 2 2A ) ( %
