Chapter 1010-3110.5.42 Developing Fan10.5.42.1 Removing the Developing Fan (FM15) 0010-9579iR7105 / iR7095 / iR70861) Remove the primary charging assembly.2) Disconnect the connector [1], and remove the 2 screws [2]; then, de-tach the fan unit [3].F-10-1303) Remove the 2 screws [1], and detach the developing assembly fan [2].F-10-131When mounting the fan, be sure that the direction of air current is as indicat-ed by the arrow.10.5.43 Delivery Anti-Adhesion Fan10.5.43.1 Removing the Delivery Anti-Adhesion Fan(FM17) 0010-9578iR7105 / iR7095 / iR70861) Remove the left lower cover. (4 screws)2) Disconnect the connector [1], and remove the 2 screws [2]; then, de-tach the fan unit [3].F-10-1323) Remove the 2 screws [1], and detach the fan [2].F-10-13310.5.44 Duplex Feed Fan10.5.44.1 Removing the Duplex Feed Fan (FM19) 0010-9575iR7105 / iR7095 / iR70861) Remove the duplex unit cover. (4 screws, 3 knobs)2) Disconnect the connector [1], and remove the 3 screws [2]; then, detectthe duplex feed fan unit [3].At this time, keep in mind that the shift assembly [4] will also come off.F-10-1343) Remove the 2 screws [1], and detach the duplex feed fan [2].F-10-135When mounting the fan, be sure that the direction of air current is as indicat-ed by the arrow.10.5.45 Separation Heat Discharge Fan10.5.45.1 Removing the Separation Heat Discharge Fan(FM20) 0010-9574iR7105 / iR7095 / iR70861) Remove the rear cover.2) Disconnect the connector, and remove the 2 screws [2]; then, detachthe separation heat discharge fan [3].[2] [3] [1][1][1][2][2][1][3][1][2][3][4][2] [2][2][1][1][1][2]
