Chapter 1616-10T-16-3XX YY Description Action to take0001The HDD cannot be recognized. - Turn off the power, and check the HDD cable. Thereafter, turn off the power.- Turn on the power, and listen for a sound from the HDD or touch the HDD, to see if the HDD is rotating.- Replace the HDD, and reinstall the system software.- Replace the main controller PCB.02There is no system software for themain CPU.At time of start-up, no start-uppartition (BOOTDEV) is found.- Start up in safe mode, and perform full formatting using the SST and reinstall the system software; then, turnoff and then on the power.- Replace the HDD, and reinstall the system software.03An interrupt has been detected whiledata is being written to the bootdevice.Take action according to the type of error code screen:- Turn off the power, and turn on the power while holding down the 1 and 9 keys.In response, the machine will automatically start to repair the sector in which the write operation has beeninterrupted. (The screen changes to solid black.) While repairs are being made, the progress of processing willbe indicated on the screen, turning white at its end. When done, turn off and then back on the power.- Start up in safe mode, and perform full formatting using the SST and reinstall the system software; then, turnoff and the back on the power.- Replace the HDD, and reinstall the system software.- Set CHK-TYPE=0, and execute HD-CHECK; then, turn off and then back on the power.- Start up in safe mode, and execute full formatting using the SST and reinstall the system software; then, turnoff and back on the power.- Replace the HDD, and reinstall the system software.06No system software is found for thesub CPU.- Start up in safe mode, and perform full formatting using the SST and reinstall the system software; then, turnoff and then back on the power.- Replace the HDD, and reinstall the system software.12A file used by the Web browser tomake references is damaged, or hasbeen deleted.- Reinstall the content of the Web browser.- Replace the HDD, and reinstall the system software.
