8-66Troubleshooting8When You Cannot Obtain Appropriate Printout ResultsRemedy 2 Set [Color Halftones], [B & W Halftones], or [Halftones] to any of [HighResolution], [Resolution], [Gradation], or [Color Tone] in the printer driver.In order to specify the setting for [Color Halftones], [B & W Halftones], or[Halftones], display the [Detailed Settings] dialog box by clicking [Details] in the[Quality] sheet.Remedy 3 Set [Matching Mode] to [Gamma Adjustment] in the printer driver.In order to specify the setting for [Matching Mode], display the [Matching] sheetby selecting the [Manual Color Settings] check box in the [Quality] sheet, andthen clicking [Color Settings].Remedy 4 Set [Matching Mode] to [Printer Default] in the printer driver, then specify thesettings for MATCHING METHOD (See p. 6-42) in the QUALITY MENU optionsin the SETUP menu so that the setting values for TEXT, GRAPHICS, andIMAGE are all the same.In order to specify the setting for [Matching Mode], display the [Matching] sheetby selecting the [Manual Color Settings] check box in the [Quality] sheet, andthen clicking [Color Settings].Colored lines and text come out faint.Cause Thin lines or text are being used.Remedy Select the [Prioritize Printing of Colored Lines and Text] check box in the printerdriver.In order to specify the setting for [Prioritize Printing of Colored Lines and Text],display the following dialog box.- For UFR II Printer Driver: Display the [Advanced Settings] dialog box byclicking [Details] in the [Quality] sheet, then clicking [Advanced Settings] in the[Detailed Settings] dialog box.- For PCL Printer Driver: Display the [Detailed Settings] dialog box by clicking[Details] in the [Quality] sheet.
