6-18Printing Environment Settings6SETUP Menu Settings■ WAKE UP TIME00:00 to 23:59If WAKE UP TIMER (See the previous item) is set to ON, Power Save Mode (thePanel Off mode and the Printer Power Save mode) is released when the timespecified in this item has elapsed.This item is convenient if you want to release the printer from Power Save Mode(the Panel Off mode and the Printer Power Save mode) on the same timeeveryday.■ POW. SAVE TIMEROFF*, ONSpecifies whether the printer should enter Power Save Mode 1 (the Panel Offmode) when the time specified in POWER SAVE TIME (See the next item) haselapsed.If ON is specified, the printer enters Power Save Mode 1 (the Panel Off mode)when the time specified in POWER SAVE TIME has elapsed.If OFF is specified, the printer does not enter Power Save Mode 1 (the Panel Offmode) even when the time specified in POWER SAVE TIME has elapsed.While the printer is in Power Save Mode 1 (the Panel Off mode), the display on thecontrol panel is off, and the following indicators are on.NOTE• The (Job) indicator is on while a job is being stored into a box even if the printeris in Power Save Mode (The printer can store jobs into the boxes only when a harddisk is installed in the printer).• As well as Power Save Mode 1 (the Panel Off mode), this printer has Power SaveMode 2 (the Printer Power Save mode). For details on Power Save Mode, see"Power Saving (Power Save Mode)," on p. 3-2.• The printer does not enter Power Save Mode 1 (the Panel Off mode) during printingeven when the time specified in POWER SAVE TIME has elapsed.• You can specify whether the printer should enter Power Save Mode when an erroris occurring in the printer (when the (Message) indicator is on, or the number inthe message blinks). (See "PWR SAVE IN ERR," on p. 6-14)Printer Status Indicator that Comes OnWhen the printer isonline (Ready) IndicatorWhen the printer isoffline (Message) Indicator
