6-35Printing Environment Settings6SETUP Menu SettingsSpecify OFF for this item when you want to match the setting of the orientation orprinting side for the last page with those for its previous page, such as when youwant to print previously printed paper etc. whose printing orientation or printingside is fixed.NOTEThe setting is effective only when 2-SIDED PRINT. is set to ON.QUALITY MENU OptionsGRADATION LEVELHIGH 1*, HIGH 2Specifies the gradation level for printing data.Specify HIGH 1 when printing pictures or other data in general quality and specifyHIGH 2 when printing in higher quality.TONER SAVEOFF*, ONSpecifies whether to use the toner save mode that is suitable for when printing aproof sheet.● About memory amount required for using the HIGH 2 modePrinting in the HIGH 2 mode requires a large amount of memory for dataprocess. Therefore, when the HIGH 2 mode is specified, the message <39 SPLMEM.FULL> may appear depending on the amount or type of data, disablingprinting. In this case, print with GRADATION LEVEL set to HIGH 1, or install anoptional expansion RAM module as needed. For details on the optionalexpansion RAM modules, see "Expansion RAM," on p. 1-14.
